Loading...
HomeMy WebLinkAbout2013 CCRTrophy Club Municipal Utility District No. 1 Public Water System ID No. TX0610018 2013 Annual Drinking Water Quality Report Consumer Confidence Report June 2014 This information is provided to you by: Trophy Club Municipal Utility District No. 1 100 Municipal Drive, Trophy Club, Texas 76262, Phone: (682) 831-4600 District Contact: Jennifer McKnight, District Manager Our Drinking Water Meets or Exceeds All Federal (EPA) Drinking Water Requirements Special Population Advisory You may be more vulnerable than the general population to certain microbial contaminants, such as Cryptosporidium, in drinking water. Infants, some elderly, or immunocompromised persons such as those undergoing chemotherapy for cancer; those who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders can be particularly at risk from infections. You should seek advice about drinking water from your physician or health care provider. Additional guidelines on appropriate means to lessen the risk of infection by Cryptosporidium are available from the Safe Drinking Water Hotline at (800) 426-4791. Water Sources: The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally -occurring minerals, and in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water before treatment include: • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, and agricultural livestock operations. • Inorganic contaminants, such as salts and metals, which can be naturally -occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming. • Pesticides and herbicides, which may come from a variety of sources such as agriculture and urban storm water runoff, and residential uses. • Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems. • Radioactive contaminants, which can be naturally -occurring or be the result of oil and gas production and mining activities. This report is a summary of the quality of the water we provide our customers. The analysis was made by using the data from the most recent U.S. Environmental Protection Agency (EPA) required tests and is presented in the following pages. We hope this information helps you become more knowledgeable about what is in your drinking water. Should you have questions or need additional copies of this report, please call the District office at (682) 831-4600. The report is also available on our website at www.tcmud.orct. Public Participation Opportunities Date: Time: Location: 3rd Tuesday of each month 7:00 p.m. Svore Administration Building 100 Municipal Drive Trophy Club, TX 76262 Este informe incluye informacion importante sobre el agua potable. Si tiene preguntas o comentarios sobre este informe en espanol, favor de Ilamar al tel. (682) 831-4600 para hablar con una persona bilingue en espanol. Where Do We Get Our Drinking Water? Our drinking water is obtained from both surface and groundwater sources. Surface water is purchased from the City of Fort Worth and its sources are Lake Worth, Eagle Mountain Lake, Lake Bridgeport, Richland Chambers Reservoir, Cedar Creek Reservoir, and the Clear Fork Trinity River (from Lake Benbrook). Groundwater sources are from four wells including three from the Paluxy Aquifer and one from the Trinity Aquifer. The Texas Commission on Environmental Quality (TCEQ) completed an assessment of your drinking water sources and results indicate that some of your sources are susceptible to certain contaminants. The sampling requirements for your water system are based on this susceptibility and previous sample data. Any detection of these contaminants may be found in this report. Some of the source water assessment information is available on Texas Drinking Water Watch at http://dww.tcea.texas.aov/DWW/. For information regarding our source water protection efforts please contact the District office at (682) 831-4600. All Drinking Water May Contain Contaminants When drinking water meets federal standards there may not be any health based benefits to purchasing bottled water or point -of -use devices. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. In order to ensure tap water is safe to drink, the EPA and TCEQ prescribe regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water, which must provide the same protection for public health. More information about contaminants and potential health effects can be obtained by calling the EPA's Safe Drinking Water Hotline at (800) 426-4791. Water Quality Data The table in this report lists all the drinking water contaminants we detected during tests conducted from the previous calendar year, unless otherwise noted. The state requires us to monitor for certain contaminants less than once per year because the concentrations of these contaminants are not expected to vary significantly from year to year. Therefore, some of the data, though representative of the water quality, is more than one year old. Secondary Constituents Many constituents (such as calcium, sodium or iron) which are often found in drinking water, can cause taste, color and odor problems. The taste and odor constituents are called secondary constituents and are regulated by the State of Texas, not the EPA. These constituents are not causes for health concerns. Therefore secondary constituents are not required to be reported in this document but they may greatly affect the appearance and taste of your water. About The Following Pages The pages that follow list all of the federally regulated or monitored contaminants which have been found in your drinking water. The United States Environmental Protection Agency (EPA) requires water systems to test up to 97 constituents. Please note that not all constituents are required to be sampled every year. Only the most recent year for sampling of a constituent is included in the report. Definitions Action Level (AL): The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow. Action Level Goal (ALG): The level of a contaminant in drinking water below which there is no known or expected risk to health. ALGs allow for a margin of safety. Maximum Contaminant Level (MCL): The highest permissible level of a contaminant in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology. Maximum Contaminant Level Goal (MCLG): The level of a contaminant in drinking water below which there is no known or expected health risk. MCLGs allow for a margin of safety. Maximum Residual Disinfectant Level (MRDL): The highest level of disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants. Maximum Residual Disinfectant Level Goal (MRDLG): The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contamination. Treatment Technique (TT): A required process intended to reduce the level of a contaminant in drinking water. Abbreviations MFL - million fibers per liter (a measure of asbestos) N/A - not applicable NTU - Nephelometric Turbidity Units ppq - parts per quadrillion, or picograms per liter ppt - parts per trillion, or nanograms per liter Maximum Residual Disinfectant Level Average Minimum Level Level Year Disinfectant pCi/L - picocuries per liter (a measure of radioactivity) ppm - parts per million, or milligrams per liter (mg/I) ppb - parts per billion, or micrograms per liter (ug/I) mrem/yr - millirems per year ND - (not -detectable) lab analysis indicates not present Maximum Level 2013 Chloramine Residual 2.9 0.9 3.5 (Total Chlorine) Disinfection By -Products Year 2013 2013 Contaminant HAA5 Total Haloacetic Acids Total Trihalomethanes Range of Levels Detected Minimum Level 1.4 — 5.2 1.4 2.6 — 5.73 Highest Level Detected 5.2 2.6 5.73 MRDL MRDLG 4.0 <4.0 MCL Unit of Violation Measure (Y or N) Source of Disinfectant Disinfectant used to control ppm N microbes. Unit of Violation Measure (Y or N) 60 ppb N 80 ppb N Source of Contaminant Byproduct of drinking water disinfection. Byproduct of drinking water disinfection. Radioa five Contaminants Year Contaminant 2013 2013 2013 Combined Radium (-226 & -228) Gross Alpha (including Radon & Uranium) Highest Level Range of Levels Detected Detected 1.0 2.0 Gross Beta 6.3 Organic Contaminants Inorganic Contaminants Year 2011 2011 2012 2011 2011 2011 2011 2011 2011 2013 2013 2011 2011 Contaminant Antimony Arsenic Asbestos Barium Beryllium Cadmium Chromium Highest Level Detected ND 3.51 ND 0.0615 ND 1.0 — 1.0 2.0 — 2.0 6.3 — 6.3 Unit of Violation MCLG MCL Source of Contaminant 0 50 pCi/L N 0 15 pCi/L N Erosion of natural deposits. 0 50 pCi/L N Erosion of natural deposits. Measure (Y or N) Decay of natural and man-made deposits. TESTING WAIVED, NOT REPORTED, OR NONE DETECTED Range of Levels MCLG MCL Detected 0-0 3.51 — 3.51 ND 0.0615 — 0.0615 Unit of Violation Measure (Y or N) 6 6 ppb 0 10 ppb Source of Contaminant Discharge from petroleum refineries; fire N retardants; ceramics; electronics; solder; test addition. Erosion of natural deposits; runoff from N orchards; runoff from glass and electronics production wastes. Decay of asbestos cement water mains; erosion of natural deposits. Discharge of drilling wastes; discharge from metal refineries; erosion of natural deposits. Discharge from metal refineries and coal 0 - 0 N burning factories; discharge from electrical, aerospace, and defense. Corrosion of galvanized pipes; erosion of N natural deposits; discharge from metal refineries; runoff from waste batteries. Discharge from steel and pulp mills; erosion of natural deposits. Erosion of natural deposits; water additive N which promotes strong teeth; discharge from fertilizer and aluminum factories. Erosion of natural deposits; discharge N from refineries and factories; runoff from landfills; runoff from cropland. Runoff from fertilizer use; leaching from N septic tanks, sewage; erosion of natural deposits. Runoff from fertilizer use; leaching from N septic tanks, sewage; erosion of natural deposits. Discharge from petroleum and metal N refineries; erosion of natural deposits; discharge from mines. Discharge from electronics, glass, and N leaching from ore -processing sites; drug factories. *Nitrate Advisory: Nitrate in drinking water at levels above 10 ppm is a health risk for infants of less than six months of age. High nitrate levels in drinking water can cause blue baby syndrome. Nitrate levels may rise quickly for short periods of time because of rainfall or agricultural activity. If you are caring for an infant you should ask advice from your health care provider. 7 7 MFL N 2 2 ppm N ND 0-0 4 4 ppb 5 5 ppb 2.63 2.63 — 2.63 100 100 ppb N Fluoride 0.57 0.57 — 0.57 4 4 Mercury ND ppm 0 — 0 2 2 ppb Nitrate " (measured as 0.425 0.425 — 0.425 10 10 nitrogen) Nitrate - Nitrite 0.004 0.004 — 0.004 10 10 Selenium 7.56 ppm ppm 7.56 — 7.56 50 50 ppb Thallium ND 0 - 0 0.5 2 ppb Lead and Copper 90thNo. of Sites Year Contaminant The Exceeding Action MCLG Unit of Violation Percentile Action Level Level Measure (Y or N) 2013 Lead 0.00357 1 0.015 0 ppm N Source of Contaminant Corrosion of household plumbing systems; erosion of natural deposits. Corrosion of household plumbing systems; 2013 Copper 0.493 0 1.3 1.3 ppm N erosion of natural deposits; leaching from wood preservatives. If present, elevated levels of lead can cause serious heal h problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. Trophy Club Municipal Utility District No. 1 is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead. Turbidity (Source Water: City of Fort Worth) Year Highest Contaminant MCL MCLG Single Measurement Lowest Monthly % of Samples Meeting Limits Turbidity Limits Unit of Violation Source of Measure (Y or N) Contaminant 2013 Turbidity TT 0.3 0.38 99.4% 0.3 NTU N Soil runoff. Turbidity is a measure of the cloudiness of water and has no health effects. It is monitored because it is a good indicator of the effectiveness of the filtration system. Microbiological Contaminants Year Contaminant 2013 Fecal Coliform & E. Coli 2013 Total Coliform Bacteria MCL N/A One positive monthly sample. Total Coliform Bacteria are used as indicators of microbial contamination of drinking water because testing for them is easy. While not disease -causing organisms themselves, they are often found in association with other microbes that are capable of causing disease. Coliform are more hardy than many disease -causing organisms; therefore, their absence from water is a good indication that the water is microbiologically safe for human consumption. Highest Single Lowest Monthly % Violation Measurement of Samples (Y or N) Meeting Limits N/A N Human and animal fecal waste. N/A 0 Source of Contaminant 100% N Naturally present in the environment. Total Organic Carbon (Source Water: City of Fort Worth) Year Contaminant MCL MCLG 2013 Total Organic Carbon % TT = removal Highest Measurement Lowest Average Measurement N/A 1.0 1.0 1.0 Violation (Y or N) Source of Contaminant N Naturally occurring. Total Organic Carbon is used to determine disinfection by-product precursors. The City of Fort Worth was compliant with all monitoring and treatment technique requirements for disinfection by-product precursors. Secondary and Other Constituents Not Regulated (No associated adverse health effects.) Year Constituent 2011 Bicarbonate 144 144 144 2011 Chloride 94.7 94.7 94.7 Average Minimum Maximum Level Level Level 2011 pH 8.4 2011 Sulfate 2011 2010 2011 Total Alkalinity as CaCO3 Total Hardness as CaCO3 Total Dissolved Solids Secondary Unit of Limit Measure N/A ppm Violation (Y or N) N Source of Constituent Corrosion of carbonate rocks such as limestone. Abundant naturally occurring element; 300 ppm N used in water purification; byproduct of oil field activity. N Measure of corrosivity of water. Naturally occurring; common industrial byproduct; byproduct of oil field activity. 8.4 8.4 8.2 units 33.8 33.8 33.8 300 144 144 144 N/A 96 103 194 N/A 366 366 366 1000 ppm ppm ppm ppm N N Naturally occurring soluble mineral salts. N Naturally occurring soluble mineral salts. N Total dissolved minerals in water. Water Loss for 2013 The water loss audit submitted to the Texas Water Development Board for the time period of January 2013 through December 2013 indicates our system lost an estimated 78 million gallons of water (8.23% of production). New Water and Sewer Rates Effective July 1, 2014 At their meeting on May 20, 2014, the District's Board of Directors approved an amended Rate Order that includes new water and sewer rates. The new rates will be effective July 1, 2014, and will appear on the bill mailed at the end of July 2014. A summary of the new rates is below and additional information is available on the Public Notices Page of the District website at www.tcmud.orq. WATER RATES SEWER RATES BASE RATES: VOLUMETRIC RATES: METER MONTHLY SIZE BASE RATE Gallons Used 5/8" 1" 1.5" 2" 3" 4" 6" $12.71 $16.71 $26.42 $38.06 $65.23 $104.04 $201.06 0 to 6,000 6,001 to 17,000 17,001 to 25,000 25,001 to 50,000 50,001 + Rate per 1000 gallons $2.70 $3.14 $3.64 $4.23 $4.91 Residential & Commercial Sewer Base Rate: $14.58 Volumetric Rate: $2.50 per 1000 gallons Residential sewer is billed for usage up to 18,0000 gallons. Commercial sewer is billed for all monthly water consumption registered through the meter.